PR Electronics Intrinsically Safe Transmitters
The PR Electronics range of Intrinsically Safe Transmitters, sometimes referred to as Isolation Barriers, provide Safe Signal Transmission for Hazardous Areas – Class 1, Div 1 Rated Environments. Highly Accurate, SIL Rated and Incorporating the Unique Clip-On Display Programmer, signal inputs and outputs can be visually monitored, calibrated and scaled. They are also certified to be mounted in Class 1, Div 2 Areas, to reduce wiring costs.
Products
- Input: Universal RTD or Thermocouple, Volt, mA, Resistance, Potentiometer
- 2-Wire Loop Supply for Loop Powered Transmitters
- Output: Active or Passive mA, and 1 x Programmable Relay Dry Contact
- Monitoring of error events and cable breakage via the individual status relay
- Power Supply: 19.2 to 31.2 Vdc and/or Power Rail
- SIL2 Full Assessment
- Optional PR-4501 Clip-On Display Programmer for Setup, Simulate, Manual Override, Calibrate, and I/O Viewing
- Optional PR-4511 Modbus display programmer
- Optional PR-4512 Bluetooth programmer for remote configuration
- 2.6KV Galvanic 3-Way Isolation (Input, Output & Supply)
- UL & FM Approved for Class 1, Div 1
- Hazardous Area, Class 1 Div 1 Applications
- Sensor Signals from Explosive Environments for Level, Temperature, Pressure, Flow, Speed, etc.
- Used predominantly in the Oil and Gas, Power, Chemical, and Water Treatment Industries
- Input: Contact Inputs, Switches, and Namur Sensors for a range of 0-5KHz
- Output: Opto or Relay Options Available
- Single or Dual Channel Option
- Monitoring of error events and cable breakage via the individual status relay
- Power Supply: 19.2 to 31.2 Vdc and/or Power Rail
- SIL2 Full Assessment
- Optional PR-4501 Clip-On Display Programmer for Setup, and I/O Viewing
- Optional PR-4511 Modbus display programmer
- Optional PR-4512 Bluetooth programmer for remote configuration
- 2.6KV Galvanic 3-Way Isolation (Input, Output & Supply)
- UL & FM Approved for Class 1, Div 1
- Hazardous Area, Class 1 Div 1 Applications
- Sensor Signals from Explosive Environments for Level or Pressure Switches, Contact Alarms etc.
- Used predominantly in the Oil and Gas, Power, Chemical, and Water Treatment Industries
- Input: Bridge the Dual mA Input Terminals to Achieve Splitter Function
- Can also be used as a Single, or Dual Input mA HART Transparent Isolator/Repeater
- HART Transparent Dual Active and Passive Inputs
- Outputs: 2 x Galvanically Isolated mA Signals (Active or Passive)
- Monitoring of error events and cable breakage via the individual status relay
- Power Supply: 19.2 to 31.2 Vdc or Power Rail
- Optional PR-4501 or PR-4511 Front Face Display to View mA Inputs / Outputs
- Optional PR-4512 Bluetooth programmer for remote monitoring
- 2.6KV Galvanic 3-Way Isolation (Input, Output & Supply)
- UL & FM Approved for Class 1, Div 1
- Hazardous Area, Class 1 Div 1 Applications
- Sensor Signals from Explosive Environments for Level, Temperature, Pressure, Flow, Speed, etc.
- Used predominantly in the Oil and Gas, Power, Chemical, and Water Treatment Industries
- Signal Splitting and Isolation
- Process signals can be transmitted to the PLC, and a secondary Chart Recorder or Panel Meter Display
- Eliminates Ground Loop Faults
- Input: Universal RTD or Thermocouple, as well as Ohm or mV
- Output: Loop Powered mA, with HART 7 Protocol
- High definition local operator interface (LOI) with 3 optical buttons
- Dynamically adaptive to wear or accumulation of dirt
- Immune to interference from ambient light sources
- Touch screen can be used with or without gloves
- Extremely high measurement accuracy
- Programmable sensor mA Output error value
- Explosion-proof Versions Available
- Programmable via Front Face, HART, or PR-5909 Loop-link programmer
- Head Mount Enclosure Temperature Measurement
- Class 1, Div 1 Environments
- Power Stations and Boilers
- Pharmaceutical
- Cement
- Oil and Gas
- Process Control Machinery