Conductivity Sensors
The EMEC Range of Industrial, Rugged, High Performance Conductivity Sensors are long-lasting, and accurate. PVDF Bodies are available for Chemical Resistance, as well Stainless Steel, and Torroidal types for Extreme Fouling Applications.
Products
Model: EMEC EICDC
Stainless Steel Conductivity Probe
- Conductivity Range: 0-20µS, 200µS or 20mS
- Maximum 217 PSI at 266°F (15 Bar at 130°C)
- 3/4 inch thread, with 4m cable
- PT100 Temperature compensation
- Other conductivity probes available upon request – see datasheet for more information
- Compatible Controllers: EMEC Series LDSCD, J DIG CD or DIN DIG CD
- Industrial Water and Waste Water Applications
- Sanitation Chemicals – Caustic, Acids, Bases
- Pharmaceutical Waste Water
- Sewer Water
- Cooling Towers
- Commercial Swimming Pools
- High Pressure and Temperature Applications
Model: EMEC EICDHPT
High Temperature Stainless Steel Conductivity Probe
- Conductivity Range: 0-20µS, 200µS or 20mS
- Maximum 217 PSI at 392°F (15 Bar Max Pressure at 200°C)
- 3/4 inch thread, with 4m cable
- PT100 Temperature compensation
- Other conductivity probes available upon request – see datasheet for more information
- Compatible Controllers: EMEC Series LDSCD, J DIG CD or DIN DIG CD
- High Temperature and High Pressure Applications
- Industrial Water and Waste Water
- Sanitation Chemicals – Caustic, Acids, Bases
- Pharmaceutical
Model: EMEC ECDI
PVDF Body with Stainless Steel Electrodes
- Conductivity Range: 0-200µS, or 5mS
- PVDF Body with Stainless Steel Electrodes
- 100 PSI at 140°F, or 29 PSI at 212°F (7 Bar at 60°C or, 2 Bar at 100°C)
- 3/4 inch thread, with 4m cable
- PT100 Temperature compensation
- Other conductivity probes available upon request – see datasheet for more information
- Compatible Controllers: EMEC Series LDSCD, J DIG CD or DIN DIG CD
- Industrial Water and Waste Water Applications
- Sanitation Chemicals – Caustic, Acids, Bases
Model: EMEC ECDC
PVDF Body with Grapite Electrodes
- Conductivity Range: 0-20mS, or 200mS
- PVDF Body with Graphite Electrodes
- 100 PSI at 140°F, or 29 PSI at 212°F (7 Bar at 60°C or, 2 Bar at 100°C)
- 3/4 inch thread, with 4m cable
- PT100 Temperature compensation
- Compatible Controllers: EMEC Series LDSCD, J DIG CD or DIN DIG CD
- Industrial Water and Waste Water Applications
- Cooling Towers
- Sanitation Chemicals – Chlorine, Bleach, Caustic, Acids, Bases
Model: EMEC ECDINDPT
Torroidal Conductivity Probe
- Conductivity Ranges: 0.3-3mS, 0.3-10mS, 0.3-30mS or 0.3-300mS
- Max 116 PSI (8 bar)
- Operation for 185°F (85°C) or Max Temporary Measurement 212°F (100°C)
- 10 Meter cable
- PEEK body
- PT100 Temperature compensation
- Requires optional EMEC PEC-IND submersible holder or EMEC PEL-IND Tee assembly
- Compatible Controller: EMEC Series LDSCD IND
- Industrial Water and Waste Water Applications
- Extreme Fouling / Coating
- High Conductivity Applications
- Sanitation Chemicals – Chlorine, Bleach, Caustic, Acids, Bases
